Precision Catalog
High-Purity Quartz Glass & Optical Substrates
Direct factory supply manufactured in Donghai County with strict ISO standards, custom CNC milling, optical surface polishing, and laser micromachining.
Technical Competency
Engineered in China's Crystal Capital for Nordic Excellence
Based in Donghai County, Jiangsu, Zunex Quartz Products Co., Ltd. blends geographic natural quartz mineral reserves with cleanroom finishing and CAD-driven laser processing.
Micron-Tolerance Laser Finishing
Our workshop is outfitted with precision multi-axis laser cutting, micro-grooving, and non-contact diamond-core drilling. We achieve hole diameters as fine as 0.3mm with zero edge chipping, micro-crack prevention, and perpendicularity required for multi-layer integrated microelectronics.
Rapid Turnaround & Technical Quoting
Procurement teams in Uppsala and the Greater Stockholm area enjoy verified rapid engineering assessments. Our 100% response rate with an average review time under 2 hours guarantees your PDF, DWG, or STEP drawings are validated against thermal and mechanical limits before casting or polishing.
Triple-Layered Shock-Proof Logistics
Fragile optical flats, ultra-thin quartz wafers (down to 0.15mm), and heavy bell jars are protected by tailored vacuum-sealed ESD packaging, high-density polyethylene foam cradles, and heat-treated export crates certified for air direct-delivery into Stockholm Arlanda Airport (ARN).
Technical Whitepaper: Precision Quartz Substrates in Advanced Nanotechnology & Photonic Systems
Synthetic fused silica (JGS1) and natural fused quartz (JGS2/JGS3) serve as foundational dielectric materials in modern solid-state physics, nanomedical microfluidics, and thin-film epitaxy. Unlike standard borosilicate or aluminosilicate technical glasses, fused quartz consists of pure silicon dioxide (SiO₂) in an amorphous, non-crystalline network. This molecular stoichiometry imparts virtually unmatched material properties: an ultra-low linear coefficient of thermal expansion (5.5 × 10⁻⁷ /°C), continuous operating thermal resilience above 1100°C, and exceptional optical transparency ranging from deep ultraviolet (DUV, ~185 nm) through short-wave infrared (SWIR, ~3500 nm).
High-Performance Material Grade Classification
For scientific instrumentation builders and cleanroom process managers, selecting the exact chemical grade determines transmission efficiency, laser-induced damage thresholds (LIDT), and fluorescence background noise. The table below outlines the core properties characterizing our certified product lines:
| Physical / Chemical Parameter | JGS1 (Synthetic Fused Silica) | JGS2 (Optical Fused Quartz) | JGS3 (Infrared Fused Quartz) |
|---|---|---|---|
| Primary Precursor Source | Chemical Vapor Deposition (SiCl₄) | Purified Natural Donghai Quartz | Electric Vacuum Melt Natural Quartz |
| Spectroscopic Window | 185 nm – 2,500 nm (Deep DUV-Vis) | 220 nm – 2,500 nm (UV-Near IR) | 260 nm – 3,500 nm (Vis-SWIR Low-OH) |
| Hydroxyl (OH⁻) Concentration | High OH (≤ 1200 ppm) | Standard OH (30 – 150 ppm) | Ultra-Low OH (≤ 5 ppm) |
| Refractive Index (nd @ 589 nm) | 1.45846 | 1.45850 | 1.45840 |
| Softening Point (°C) | 1585 °C | 1683 °C | 1710 °C |
| Standard Surface Finish | 20/10 Scratch-Dig, λ/10 Flatness | 40/20 Scratch-Dig, λ/4 Flatness | 60/40 Scratch-Dig, Commercial |
Localized Applications: Fueling the Uppsala Industrial & Research Ecosystem
The city of Uppsala holds an elite position across Europe as a core intersection of cutting-edge life sciences, microfluidic sensor prototyping, and advanced materials engineering. Centered around institutions like Uppsala University’s Ångström Laboratory and research parks across Fyrislund, research and industrial enterprises require custom quartz substrates engineered to eliminate thermal drift and trace chemical contamination.
Cleanroom Nanofabrication
Within cleanroom environments like the MSL (Microsystems Technology) facilities, high-purity JGS1 fused silica wafers are actively employed as etch masks, insulating carrier substrates, and deep-UV lithography optical exposure windows where zero bubble inclusion is compulsory.
Biotechnology & Life Sciences
Uppsala’s renowned bioprocess and chromatography sectors rely heavily on laser-cut quartz flow cells and spectroscopy viewing apertures. Fused quartz eliminates the autofluorescence typical of cheap glass, enabling single-molecule detection in capillary electrophoresis systems.
Next-Gen Battery & Materials
Energy material research, notably around the Ångström Advanced Battery Centre, demands corrosion-resistant BET tubes, twin-tube reaction furnaces, and vacuum CVD quartz bell jars capable of sustaining volatile chemistry under intense thermal cycling.
Localized Procurement Trends & Future Outlook in Sweden
Swedish high-tech manufacturing faces pressing challenges: localized supply bottlenecks for optical-grade raw crystals, escalating domestic energy tariffs driving European glass foundries to historic high surcharges, and the urgent requirement for accelerated prototyping-to-production cycles. Uppsala hardware designers are steering away from generic catalog distributors who act as middlemen with 8–12 week lead times. Instead, strategic sourcing professionals are establishing direct tier-1 relationships with specialized Chinese manufacturers capable of providing end-to-end CNC machining, laser hole punching, and spectroscopic validation reports direct from Donghai’s industrial quartz cluster.
Moreover, the push toward carbon-neutral microelectronics and solar cell innovation in Scandinavia is intensifying the demand for low-trace-metal fused quartz consumables. Diffusion tubes, carrier boats, and wafers must demonstrate iron (Fe), copper (Cu), and alkali levels under 0.1 ppm to protect chip yields in sub-10nm thin film depositions. Zunex Quartz’s continuous thermal flame polishing and ultrasonic acid-leaching protocols meet these stringent international expectations without imposing traditional distributor markups.
Procurement Knowledge Base
Frequently Asked Questions by Uppsala & European Buyers
Technical answers covering material selection, custom tolerances, Swedish import regulations, and factory verification.
What specific drawing formats are required to begin precision laser machining?
Our engineering department processes 2D and 3D industrial files, including DXF, DWG, PDF (with dimensioning and tolerance callouts), and 3D CAD formats like STEP (.stp) or IGES (.igs). If you only have hand-sketched prototypes or damaged sample parts, our CAD technicians can reverse-engineer the component and provide an approval drawing prior to production cutting.
How does Zunex prevent micro-cracks and stress propagation in drilled quartz plates?
Drilling fused quartz with standard mechanical rotary drill bits introduces subsurface micro-fissures that expand under thermal cycling. We utilize ultra-short pulsed cold laser machining and diamond-tipped CNC ultrasonic core mills. Following drilling, our parts undergo programmed thermal annealing at approximately 1215°C to relieve internal stresses, accompanied by optical polariscope birefringence validation.
What are the typical shipping lead times and DDP delivery terms to Uppsala, Sweden?
For custom prototypes or small batches (<50 pieces), fabrication generally takes 7 to 10 working days. We partner with air couriers (DHL, FedEx, UPS) directly routed from Shanghai to Stockholm Arlanda Airport (ARN), reaching Uppsala cleanrooms within 3 to 5 business days. We provide complete DDP (Delivered Duty Paid) commercial invoices to streamline Swedish customs and Tullverket clearance.
Can you supply certified inspection documentation for trace contamination in cleanroom environments?
Yes. Every export batch can be accompanied by an ICP-MS chemical purity analysis certifying SiO₂ purity ≥ 99.99%, alongside dimensional inspection reports measured on automated Coordinate Measuring Machines (CMM) and surface roughness interferometry records showing Ra values down to 0.5 nm for optical surfaces.
Why choose a direct Donghai County manufacturer instead of domestic European stockholders?
Donghai County handles over 70% of China's quartz production and houses the most comprehensive crystal supply chain in the world. Sourcing directly from Zunex eliminates secondary brand surcharges and distributor markups (often lowering procurement unit costs by 35%–55%), while providing direct communication with our manufacturing engineers rather than commercial brokers.
Ready to Accelerate Your Uppsala Cleanroom or Optical Project?
Whether you require standard optical fused silica plates, complex BET testing tubes, or bespoke semiconductor quartzware, our technical engineering team will review your specifications and issue an actionable quote within 2 hours.
Get Catalog